INFINIX X572 (NOTE 4) CHARGING PROBLEM SOLUTION & USB WAYS




Infinix X572 jumper solution.



This is a solution to infinix x572 (NOTE 4) not charging problem, provided the charging port is still OK and power is not reaching the VBUS in the upper panel.
Make a jumper from the lower PCB to the upper PCB as indicated in the picture
...

Comments

  1. Unknown28 February 2019 at 10:11

    Not changing percent when am charging

    ReplyDelete
  2. Unknown12 March 2019 at 07:00

    Ineed charging port please help me..where do i see

    ReplyDelete
  3. Unknown17 March 2019 at 01:26

    The USB Port is Available at

    https://buymobilespares.com/product/charging-board-port-for-infinix-note-4-x572/

    ReplyDelete
    Replies
    1. Unknown2 April 2019 at 00:40

      This comment has been removed by a blog administrator.

      Delete
  4. Unknown25 March 2019 at 05:41

    I go to charge on mobile as same x charge but not to increase that taking charging for many hrs r day to do that

    ReplyDelete
  5. Fagbemi _Oluwaseyi25 May 2019 at 16:33

    Ples help sir infinix 571disple LCD light solution jumper

    ReplyDelete
  6. Fagbemi _Oluwaseyi25 May 2019 at 16:46

    Infinix 571 Disple lcd light solution jumper

    ReplyDelete
  7. Unknown27 February 2020 at 09:45

    only charging in switching off but not charging in switched on for the phone error coming for OTG
    connection permission

    ReplyDelete
  8. Unknown17 January 2021 at 23:50

    How to jumper battery to pcb ? Cause connector battery is damage

    ReplyDelete
  9. Princemanny16 April 2022 at 14:21

    My infinix note4 is just charging and not increasing percentage, plz I need solution

    ReplyDelete

Post a Comment

Popular posts from this blog

AWOOF!!!! MTN FREE 2GB DATA PLAN

Image
Text JKCJHC to 444 you will receive a message As Shown in bellow Screen short.. To Check The Data Balance : Go to your text message, Type status to 444 to view your data HOW CAN I USE THE 2GB DATA ON MY ANDROID DEVICES? To enjoy your free 2GB data on Android Devices. You need to tweak your phone imei to a Blackberry device imei, after that you also need Psiphon vpn to power it up. You can use your installed or download Sypon Shield, ProNET, or Psiphon Handler. Tweak your Android imei to any of the below Blackberry imei 358265011970677 358265019457685 358265019457624 358265019457680 358265019452453 358265019457298 358265019457784 358265019457902 358265019457810 358265019456820 358265019450532 358265019457689 358265019452094 358265019457687 358265019457908 358265019457309 Once you are through with above steps, configure your Psiphon vpn as show below. Create New APN settings on your phone as follows: » Open yo...
Read more